The Roofing RIB Company team came out to look at our roof since we had a few leaks. He was really professional and explained the whole roof structure and what caused the leak. We ended up replacing the whole roof because it was almost 35 years old; the price was reasonable compared to the other quotes we got. Would definitely recommend Roofing RIB Company.

Roof Replacement & New Roof
Installation in Sherman Oaks, CA
Full tear-off re-roofs for Sherman Oaks: architectural shingle on the ranch flats. Every permit pulled, every roof inspected first, from our base here in Sherman Oaks.
Sherman Oaks roof replacement cost (2026): $24,000–$50,000 for a typical 1,500–2,500 sq ft shingle re-roof; tile and metal run higher. Typical time: 2–4 days on site for shingle, 1–2 weeks for tile or metal.
Permits: LADBS, City of Los Angeles; most shingle re-roofs qualify for an express permit, hillside parcels south of Ventura need Class A assemblies. The hills south of Ventura Boulevard sit largely inside the City's Very High Fire Hazard Severity Zone, where LADBS requires a Class A roof covering; we check the exact parcel on ZIMAS before quoting. Roofing RIB Company is based in Sherman Oaks and quotes after a free inspection. Only need a leak fixed? See roof repair in Sherman Oaks.
Key Facts
at a Glance
Cost (2026 price range)
$24,000–$50,000 for a typical 1,500–2,500 sq ft shingle re-roof; tile and metal run higher
Time
2–4 days on site for shingle, 1–2 weeks for tile or metal
Permit
LADBS, City of Los Angeles; most shingle re-roofs qualify for an express permit, hillside parcels south of Ventura need Class A assemblies
Fire zone
The hills south of Ventura Boulevard sit largely inside the City's Very High Fire Hazard Severity Zone, where LADBS requires a Class A roof covering
Proof
5.0★ Google (2 reviews) · 5.0★ Yelp (2 reviews) · Serving Sherman Oaks and the San Fernando Valley since 2016 · written workmanship warranty on every job
Next step
Free inspection and written quote: (818) 600-6707
Roofing RIB Company replaces roofs across Sherman Oaks, from Chandler Estates and Sherman Village to Longridge Estates: architectural shingle on the ranch flats, torch-down or built-up membranes on mid-century low-slope sections and room additions, concrete and clay tile on the larger traditional and Spanish homes, and Class A assemblies on the hillside parcels. Permits through LADBS, City of Los Angeles. Hillside parcels get Class A assemblies, City of Los Angeles replacements over 50% get a CRRC-rated cool roof. Free inspection and written quote: (818) 600-6707.
Re-Roofing
Sherman Oaks
1940s–60s ranch and mid-century homes on the flats, post-and-beam houses with low-slope roofs, larger traditional and Spanish homes and hillside houses south of Ventura make up most of Sherman Oaks. The roofs that go with those houses are architectural shingle on the ranch flats, torch-down or built-up membranes on mid-century low-slope sections and room additions, concrete and clay tile on the larger traditional and Spanish homes, and Class A assemblies on the hillside parcels.
Ventura Boulevard splits the job: on the flats north of it the roofs are simple ranch gables that re-roof in two or three days; south of it the canyon streets leave no room for a dumpster, material goes up by hand, and the assembly has to be Class A.
Shingle tear-off and re-roof on the 1950s ranches, flat-section leak repairs where a low-slope addition meets the main roof, and tile underlayment replacement on the south-of-Ventura homes are the jobs we see most in Sherman Oaks. A replacement from Roofing RIB Company starts with a full tear-off to the deck, a per-sheet decking allowance written into the quote, synthetic underlayment with self-adhered membrane in the valleys and at every penetration, new flashing and vents, and then the covering you choose: a Class A cool-roof architectural shingle, concrete or clay tile, standing seam metal, or a TPO or torch-down membrane on the flat sections.
Permits go to LADBS at the Van Nuys Development Services Center, 6262 Van Nuys Blvd, about ten minutes up Van Nuys Boulevard from our base. LADBS issues most shingle re-roofs as an express permit (no plan check) when the covering is Class A or B and weighs under 6 lb/sq ft over solid sheathing; tile and other heavier coverings go through the standard permit process. Within the City of Los Angeles, a residential roof replacement covering more than 50% of the roof area must use a cool roof product labeled and certified by the Cool Roof Rating Council. The hills south of Ventura Boulevard sit largely inside the City's Very High Fire Hazard Severity Zone, where LADBS requires a Class A roof covering; we check the exact parcel on ZIMAS before quoting.

Tear-Off to
Final Inspection
Full Tear-Off to the Deck
Every layer off, debris hauled the same day, nails swept from the yard and driveway with magnets.
Decking Allowance in Writing
Rotted plywood or skip sheathing replaced at a per-sheet price that is in the quote before we start, so Sherman Oaks homeowners never get a surprise on day one.
Underlayment, Flashing & Vents
Synthetic underlayment, ice-and-water membrane in the valleys and around chimneys, skylights and pipes, new drip edge, flashing and attic vents.
The Covering That Fits the House
Cool-roof architectural shingle for the ranches and bungalows, tile for the Spanish and traditional homes, standing seam for modern rebuilds, TPO or torch-down for the flat sections.
Permit & Final Inspection
LADBS express permit for shingle, plan check for heavier tile. We pull the permit, schedule the final and hand you the closed permit.
Warranty Paperwork
Manufacturer material warranty registered in your name plus our written workmanship warranty, both delivered with the closed permit.
Permits, Fire Zones
and Roof Types
Permits go to LADBS at the Van Nuys Development Services Center, 6262 Van Nuys Blvd, about ten minutes up Van Nuys Boulevard from our base. LADBS issues most shingle re-roofs as an express permit (no plan check) when the covering is Class A or B and weighs under 6 lb/sq ft over solid sheathing; tile and other heavier coverings go through the standard permit process.
The hills south of Ventura Boulevard sit largely inside the City's Very High Fire Hazard Severity Zone, where LADBS requires a Class A roof covering; we check the exact parcel on ZIMAS before quoting.
Sherman Oaks Roof Replacement
Price Ranges (2026)
| Scope | Planning range | What's included |
|---|---|---|
| Architectural shingle re-roof | $24,000–$50,000 | Full tear-off of a 1,500–2,500 sq ft roof, synthetic underlayment, new flashing and vents, CRRC-rated cool-roof shingle where the City requires it, permit and haul-away. |
| Per square (100 sq ft), shingle | $1,200–$2,400 | Installed, including tear-off and disposal; the spread is roof pitch, number of layers, decking repairs and access. |
| Concrete tile | $20–$36 per sq ft | New concrete tile over new underlayment and battens; plan-check permit because tile exceeds the 6 lb/sq ft express-permit limit. |
| Clay tile | $30–$50 per sq ft | Mission or S-tile over new underlayment; the historic Spanish homes in Burbank and Toluca Lake sit here. |
| Standing seam metal | $26–$42 per sq ft | Concealed-fastener steel or aluminum panels. |
Our typical 2026 price ranges for Valley homes. roof size, pitch, layers, decking and access move a real Sherman Oaks quote inside or outside these bands. Your written quote after a free inspection sets the price.
Who installs new roofs in Sherman Oaks?
Roofing RIB Company is based in Sherman Oaks and installs new roofs across the neighborhood, from the ranch flats north of Ventura Boulevard to the hillside streets south of it. One crew does the tear-off, decking, underlayment, flashing and the new covering, and we pull the permit and book the final inspection. You get an itemized written quote after a free inspection.
Can you install a metal roof on a Sherman Oaks house?
Yes. Standing seam metal plans at $26–$42 per sq ft installed in 2026 figures. It suits the mid-century and modern homes and the hillside houses where a long-life roof matters most; on a 1950s ranch, a cool-roof architectural shingle at $24,000–$50,000 for a typical re-roof is usually the better value. The metal roofing page covers panels and finishes.
Do you replace tile roofs in Sherman Oaks?
Yes. New concrete tile plans at $20–$36 per sq ft and clay tile at $30–$50 per sq ft installed. On many of the larger Spanish and traditional homes south of Ventura the tile itself is still sound and only the underlayment under it has worn out, so the job is often a lift and relay: the tile comes off, new underlayment goes down and the same tile goes back. The inspection tells you which one your roof needs.
What happens to the flat sections during a Sherman Oaks re-roof?
Many Sherman Oaks homes have a low-slope addition, patio cover or garage conversion tied into the main roof, usually modified bitumen (torch-down). We quote it with the re-roof so the transition is rebuilt once: torch-down at $9–$16 per sq ft or white TPO at $10–$18 per sq ft installed. If only the flat section is failing, see flat roof repair in Sherman Oaks.
Three Steps.
No Surprises.
Free Roof Inspection
A roofer, not a salesperson, walks every slope, checks the flashing, penetrations and attic side, and photographs what they find. You get a straight answer on repair versus replacement.
Written Quote
An itemized written quote for the roof replacement: tear-off, decking allowance, underlayment, covering, flashing, vents, permit and haul-away. The price in the quote is the price on the invoice unless you change the scope.
Permit, Build, Inspect
We pull the permit, protect the property, complete the work in the quoted window and schedule the final inspection. You get the closed permit and the material warranty paperwork at the end.
Get a Written
Sherman Oaks Re-Roof Quote
Tell us the age of the roof, the material and anything you have noticed, and a roofer will call to schedule a free inspection at your Sherman Oaks home.
Prefer to talk it through?
(818) 600-6707What Clients Say About
Our Roofing Work
Every review below is posted on our public Google or Yelp listing; we never write or buy reviews.
I've had many roofers come to check my roof and got a wide variety of quotes, sales gimmicks and outright lies. This company was nothing like that. They called right back when I asked for a quote and made an appointment. When they showed up, they took measurements, explained their process, and gave me a copy of their insurance and bond documents, and a clear and simple contract that made sense. They came on the agreed day and finished the job quickly and efficiently. It looks good.
Can't be happier. They did my roof and solar system combo deal with no-APR financing.
Questions We Hear
in Sherman Oaks
Planning range for 2026: $24,000–$50,000 for a typical 1,500–2,500 sq ft shingle re-roof; tile and metal run higher. In Sherman Oaks the usual scope is 1940s–60s ranch and mid-century homes on the flats, and a two-layer tear-off, decking repairs or hillside access move the quote within the range. The itemized written quote follows a free inspection.
2–4 days on site for shingle, 1–2 weeks for tile or metal. On 1940s–60s ranch and mid-century homes on the flats, most shingle roofs are dried in on day one and finished within two to four days; tile and metal take longer.
For a Sherman Oaks address: Permits go to LADBS at the Van Nuys Development Services Center, 6262 Van Nuys Blvd, about ten minutes up Van Nuys Boulevard from our base. LADBS issues most shingle re-roofs as an express permit (no plan check) when the covering is Class A or B and weighs under 6 lb/sq ft over solid sheathing; tile and other heavier coverings go through the standard permit process.
Within the City of Los Angeles, a residential roof replacement covering more than 50% of the roof area must use a cool roof product labeled and certified by the Cool Roof Rating Council. For architectural shingle on the ranch flats, light rated colors are widely available.
The hills south of Ventura Boulevard sit largely inside the City's Very High Fire Hazard Severity Zone, where LADBS requires a Class A roof covering; we check the exact parcel on ZIMAS before quoting. Class A is also our standard everywhere, fire zone or not.
It depends on the house. In Sherman Oaks that usually means architectural shingle on the ranch flats, torch-down or built-up membranes on mid-century low-slope sections and room additions, concrete and clay tile on the larger traditional and Spanish homes, and Class A assemblies on the hillside parcels. We quote the option that fits the house and the budget.
Roofing RIB Company, a local roofing contractor based in Sherman Oaks, replaces roofs across Sherman Oaks, from Chandler Estates to Sherman Village, with the permit, cool-roof and Class A requirements and the final inspection on one written quote. Call (818) 600-6707.
Read Before
You Hire a Roofer
Plain-language guides with the code sections and sources cited.
Roof Repair in Sherman Oaks
Leaks, flashing, storm damage →
Service HubRoof Replacement Across the Valley
Materials, process and ranges →
Same CityCommercial Roofing in Sherman Oaks
Ventura Boulevard storefronts and offices →
Same CityFlat Roof Repair in Sherman Oaks
Seams, ponding and coatings →
NearbyRoof Replacement in Studio City
A few minutes away →
NearbyRoof Replacement in Van Nuys
A few minutes away →
NearbyRoof Replacement in Encino
A few minutes away →
GuideRoof Replacement Cost in Los Angeles (2026)
Every line item explained →
GuideClass A Roofing in the Fire Zones
What hillside parcels must use →
Sources
- LADBS Information Bulletin P/GI 2026-003, Express Permits (No Plan Check Required), effective 01-01-2026, revised 06-10-2026 · checked 2026-10-16
- California Energy Commission, 2025 Building Energy Efficiency Standards · checked 2026-10-16
- City of Los Angeles ZIMAS parcel lookup · checked 2026-10-15
- 2025 California Residential Code, Chapter 9, Reroofing (text via UpCodes) · checked 2026-10-16
Let's Look at Your
Sherman Oaks Roof
Free inspection, written quote, permit pulled. One local crew from the first visit to the final inspection.
(818) 600-6707
