Full tear-off re-roofs for Valley Village: small. Every permit pulled, every roof inspected first, from our base in Sherman Oaks.
Valley Village roof replacement cost (2026): $12,000–$25,000 for a typical 1,500–2,500 sq ft shingle re-roof; tile and metal run higher. Typical time on site is 2–4 days on site for shingle, 1–2 weeks for tile or metal.
Permits: LADBS, City of Los Angeles; most re-roofs qualify for an express permit. Valley Village is flat Valley floor outside the hillside fire zones; Class A assemblies are our standard rather than a zoning requirement. Roofing RIB Company is based in Sherman Oaks, about 10 minutes from Valley Village and quotes after a free inspection.
Roofing RIB Company replaces roofs across Valley Village, from the Colfax Meadows edge, Valley Village Park, the blocks along Chandler and Magnolia: small, steep shingle roofs on the bungalows, often over original skip sheathing that needs new decking at tear-off, with low-slope sections over later additions. Permits through LADBS, City of Los Angeles. Hillside parcels get Class A assemblies, City of Los Angeles replacements over 50% get a CRRC-rated cool roof. Free inspection and written quote: (818) 619-2948.
1930s–40s bungalows and small ranch homes on 6,000–6,500 sq ft lots make up most of Valley Village. The roofs that go with those houses are small, steep shingle roofs on the bungalows, often over original skip sheathing that needs new decking at tear-off, with low-slope sections over later additions.
Valley Village roofs are small, steep and old: 1930s–40s bungalows with brick chimneys whose flashing has been caulked for decades and skip sheathing under the shingle that needs new decking at tear-off.
Bungalow re-roofs with new plywood decking, flashing repairs at older chimneys, and flat-section repairs where additions tie into the main roof are the jobs we see most in Valley Village. A replacement from Roofing RIB Company starts with a full tear-off to the deck, a per-sheet decking allowance written into the quote, synthetic underlayment with self-adhered membrane in the valleys and at every penetration, new flashing and vents, and then the covering you choose: a Class A cool-roof architectural shingle, concrete or clay tile, standing seam metal, or a TPO or torch-down membrane on the flat sections.
Permits go to LADBS at the Van Nuys Development Services Center, 6262 Van Nuys Blvd. LADBS issues most shingle re-roofs as an express permit (no plan check) when the covering is Class A or B and weighs under 6 lb/sq ft over solid sheathing; tile and other heavier coverings go through the standard permit process. Within the City of Los Angeles, a residential roof replacement covering more than 50% of the roof area must use a cool roof product labeled and certified by the Cool Roof Rating Council. Valley Village is flat Valley floor outside the hillside fire zones; Class A assemblies are our standard rather than a zoning requirement.
Every layer off, debris hauled the same day, nails swept from the yard and driveway with magnets.
Rotted plywood or skip sheathing replaced at a per-sheet price that is in the quote before we start, so Valley Village homeowners never get a surprise on day one.
Synthetic underlayment, ice-and-water membrane in the valleys and around chimneys, skylights and pipes, new drip edge, flashing and attic vents.
Cool-roof architectural shingle for the ranches and bungalows, tile for the Spanish and traditional homes, standing seam for modern rebuilds, TPO or torch-down for the flat sections.
LADBS express permit for shingle, plan check for heavier tile. We pull the permit, schedule the final and hand you the closed permit.
Manufacturer material warranty registered in your name plus our written workmanship warranty, both delivered with the closed permit.
Permits go to LADBS at the Van Nuys Development Services Center, 6262 Van Nuys Blvd. LADBS issues most shingle re-roofs as an express permit (no plan check) when the covering is Class A or B and weighs under 6 lb/sq ft over solid sheathing; tile and other heavier coverings go through the standard permit process.
Valley Village is flat Valley floor outside the hillside fire zones; Class A assemblies are our standard rather than a zoning requirement.
| Scope | Planning range | What's included |
|---|---|---|
| Architectural shingle re-roof | $12,000–$25,000 | Full tear-off of a 1,500–2,500 sq ft roof, synthetic underlayment, new flashing and vents, CRRC-rated cool-roof shingle where the City requires it, permit and haul-away. |
| Per square (100 sq ft), shingle | $600–$1,200 | Installed, including tear-off and disposal; the spread is roof pitch, number of layers, decking repairs and access. |
| Concrete tile | $10–$18 per sq ft | New concrete tile over new underlayment and battens; plan-check permit because tile exceeds the 6 lb/sq ft express-permit limit. |
| Clay tile | $15–$25 per sq ft | Mission or S-tile over new underlayment; the historic Spanish homes in Burbank and Toluca Lake sit here. |
| Standing seam metal | $13–$21 per sq ft | Concealed-fastener steel or aluminum panels; the Los Angeles metro figure in the published guides. |
Planning ranges compiled from the published Los Angeles cost guides listed below, not a price list; roof size, pitch, layers, decking and access move a real Valley Village quote inside or outside these bands. Your written quote after a free inspection sets the price.
A roofer, not a salesperson, walks every slope, checks the flashing, penetrations and attic side, and photographs what they find. You get a straight answer on repair versus replacement.
An itemized written quote for the roof replacement: tear-off, decking allowance, underlayment, covering, flashing, vents, permit and haul-away. The price in the quote is the price on the invoice unless you change the scope.
We pull the permit, protect the property, complete the work in the quoted window and schedule the final inspection. You get the closed permit and the material warranty paperwork at the end.
Tell us the age of the roof, the material and anything you have noticed, and a roofer will call to schedule a free inspection at your Valley Village home.
Prefer to talk it through?
(818) 619-2948Every review below is posted on our public Google or Yelp listing; we never write or buy reviews.
The Roofing RIB Company team came out to look at our roof since we had a few leaks. He was really professional and explained the whole roof structure and what caused the leak. We ended up replacing the whole roof because it was almost 35 years old; the price was reasonable compared to the other quotes we got. Would definitely recommend Roofing RIB Company.
I've had many roofers come to check my roof and got a wide variety of quotes, sales gimmicks and outright lies. This company was nothing like that. They called right back when I asked for a quote and made an appointment. When they showed up, they took measurements, explained their process, and gave me a copy of their insurance and bond documents, and a clear and simple contract that made sense. They came on the agreed day and finished the job quickly and efficiently. It looks good.
Can't be happier. They did my roof and solar system combo deal with no-APR financing.
Planning range for 2026: $12,000–$25,000 for a typical 1,500–2,500 sq ft shingle re-roof; tile and metal run higher. The Valley Village housing stock, 1930s–40s bungalows and small ranch homes on 6, sets the typical scope; a two-layer tear-off, decking repairs or hillside access move the quote within the range. You get an itemized written quote after a free inspection.
2–4 days on site for shingle, 1–2 weeks for tile or metal. Most Valley Village shingle roofs are dried in on day one and finished within two to four days; tile and metal take longer.
Permits go to LADBS at the Van Nuys Development Services Center, 6262 Van Nuys Blvd. LADBS issues most shingle re-roofs as an express permit (no plan check) when the covering is Class A or B and weighs under 6 lb/sq ft over solid sheathing; tile and other heavier coverings go through the standard permit process.
Within the City of Los Angeles, a residential roof replacement covering more than 50% of the roof area must use a cool roof product labeled and certified by the Cool Roof Rating Council. Nearly every shingle we install is a CRRC-rated cool-roof color regardless.
Valley Village is flat Valley floor outside the hillside fire zones; Class A assemblies are our standard rather than a zoning requirement. We install Class A assemblies anyway; the shingle lines we use already qualify and the underlayment package costs little more.
For 1930s–40s bungalows and small ranch homes on 6, usually: small, steep shingle roofs on the bungalows, often over original skip sheathing that needs new decking at tear-off, with low-slope sections over later additions. We quote the option that fits the house and the budget, and tell you when a cheaper one would be the wrong call.
Roofing RIB Company, an insured local roofing contractor based in Sherman Oaks about 10 minutes away, replaces shingle, tile, metal and flat roofs across Valley Village with the permit, the cool-roof and Class A requirements and the final inspection handled on one written quote. Call (818) 619-2948 for a free inspection.
Plain-language guides with the code sections and sources cited.
Leaks, flashing, storm damage →
Service HubMaterials, process and ranges →
NearbyA few minutes away →
NearbyA few minutes away →
NearbyA few minutes away →
GuideEvery line item explained →
GuideExpress permits and plan check →
Free inspection, written quote, permit pulled. One local crew from the first visit to the final inspection.
(818) 619-2948